Conference Room Acoustic Treatment: A Practical Guide
By the Extint Decor team · Updated November 2026
Quick answer: Conference room acoustic treatment means absorbing the sound that bounces off glass, hard walls and the ceiling so voices are clear in the room and on video calls. Add acoustic panels to the walls (especially the wall behind the speakers and the rear wall), treat the ceiling above the table, and soften glass with curtains or blinds. Velvet and wooden panels suit most boardrooms.
Why Conference Rooms Sound Bad
Meeting rooms are built for looks and light, not sound. Glass walls, a hard table, a flat ceiling and bare plaster create a room where every voice bounces around. People then talk over each other’s echo, remote participants hear a hollow, distant sound, and everyone strains to follow the discussion.
The most common complaints are:
- Echo and “boxy” sound that makes speech tiring to follow
- Poor video call quality, because microphones pick up the room as well as the speaker
- Noise leaking into or out of the room through glass and door gaps
The first two are treated with absorption (panels). The third needs blocking (sealing and construction), which panels alone cannot do.
Step 1: Diagnose the Room
Walk into the room empty and clap once. A ringing, lingering tail means too many reflections. Then note:
- Surfaces: How much is glass, plaster or tile?
- Furniture: Is the table hard and are chairs upholstered?
- Ceiling: Is it flat and hard, or already acoustic tile?
- Layout: Are two walls bare and facing each other?
- Use: Is it mainly in-person discussion, video calls or presentations?
Step 2: Choose the Right Panels
| Priority | Recommended panel | Why |
| Premium boardroom look with strong absorption | Velvet Acoustic Panels (NRC up to 0.70) | Soft, luxury finish and solid echo control |
| Highest absorption and a design feature | Wooden Acoustic Panels (NRC up to 0.90) | Highest NRC in our range; paintable to match interiors |
| Larger rooms and ceilings | Infill Wall Panels (NRC up to 0.70) | Lightweight roll form, efficient large-area coverage |
| Budget-friendly or colorful breakout rooms | Thin Acoustic Foam (Slim Sheets) (NRC up to 0.70) | Wide color range, easy to cut to shape |
Not sure between wood and velvet? Read wooden vs velvet acoustic panels.
Step 3: Place the Panels
Placement matters more than spreading panels evenly.
- Wall behind the display or the main speakers. This is where sound travels first and bounces back.
- Rear wall. It reflects sound straight back toward the table.
- Side walls at head height. Focus on the stretches between windows or glass.
- Ceiling above the table. Hard, flat ceilings add repeated reflections between ceiling and table.
Our guide to where to place acoustic panels explains the mirror test for finding reflection points.
Step 4: Deal With Glass
Glass reflects sound strongly and cannot hold panels. Practical fixes:
- Add heavy curtains or fabric blinds that can be drawn during meetings
- Place panels on the solid walls on either side of the glass
- Use a rug or carpet tiles under the table
- If glass is the main wall, treat the opposite wall and the ceiling first
Step 5: Work Out How Many Panels
Standard Extint Decor panels measure 1200 x 600 x 15mm, which is 0.72 square metres each. Divide the area you plan to cover by 0.72.
| Wall area to cover | Panels (approx.) |
| 6 m² (small huddle room) | 9 |
| 12 m² (medium meeting room) | 17 |
| 24 m² (boardroom with ceiling strip) | 34 |
These are quantity estimates, not recommendations. Rooms differ, so add panels in stages and re-test. For a tailored estimate, request a quote. Our cost guide shows what drives the price.
Improving Video Call Quality
Treatment helps calls because microphones hear less of the room. For best results combine it with good habits:
- Position the microphone close to participants, not in the middle of an echoing space
- Keep the camera and microphone away from hard, bare walls
- Avoid sitting directly in front of glass
- Test a call after installation and adjust
What Panels Cannot Do
- They do not soundproof. Panels reduce echo inside the room. Stopping a confidential meeting from being overheard needs solid walls to the ceiling slab, sealed doors and no gaps.
- They do not remove all sound. The goal is clear speech, not silence.
- They will not fix noisy air conditioning or equipment. That needs a separate fix at the source.
Panels around 15mm thick work mainly on voice-range frequencies, which is exactly what meeting rooms need.
Common Mistakes
- Treating only one wall
- Ignoring the ceiling
- Expecting panels to stop sound leaving through glass
- Choosing unrated decorative foam with no performance data
- Over-treating until the room feels dead and uncomfortable
Frequently Asked Questions
How do you reduce echo in a conference room?
Add acoustic panels to the walls and ceiling, soften glass with curtains, and use carpet and upholstered chairs. Start at the wall behind the speakers and the rear wall.
Which acoustic panel is best for a meeting room?
Velvet Acoustic Panels suit most meeting rooms because they combine absorption with a premium finish. Wooden panels offer the highest absorption.
Do acoustic panels improve video calls?
Yes. Less room echo means microphones capture cleaner speech, so remote participants hear more clearly.
Can panels make a room private?
Not on their own. Privacy depends on walls, doors and sealing. Panels improve clarity inside the room.
How long does installation take?
It depends on room size and ceiling work. Extint Decor handles design and installation across India and provides a timeline with each quote.
Plan Your Meeting Room
Send us your room size, photos and use (in-person, video calls or both) and we’ll recommend panels and quantities. Request a quote or contact Extint Decor.
Related reading: acoustic panels for offices · how to reduce echo in a room · how to choose acoustic panels Follow our projects: Instagram